8. Vector Chart Material
8-23
8.4.6 How to use SENC convert window to initiate SENC
conversion
Normally automatic SENC conversion is selected and there is no need to initiate SENC conversions (from the
SENC convert window). If you do not use the automatic SENC conversion, you need to manually initiate SENC
conversion. Another case in which you need to manually initiate SENC conversion is if you upgraded or reloaded
the ECDIS software from the ECDIS software CD-ROM.
To initiate SENC conversions manually, do the following:
1. Spin the scrollwheel to display Menu/Info/Chart Menu in the mouse functions area then push the right mouse
button.
2. Select SENC Convert from the menu to show the SENC CONVERT window.
3. Use the Cells button to select an individual chart, or use the Groups button to select a group of charts. Then,
click the Convert button to initiate the SENC conversion of the charts.
"Convert" only converts those charts that are not currently converted into the SENC format. If your selected
chart or all members of your selected group are already in the SENC format, the Conversion list remains empty.
If all or some charts are not yet in the SENC format, they are added to the Conversion list (see the example
below). If, for some reason, you need to force SENC conversion of an already converted chart, see section 8.14
"Other Features of Vector Charts".
Note 1: You may remove charts from the conversion list at any time. Use the cursor to highlight the charts to
remove then click the Select button. Finally, click the Cancel Conv. button to remove selected charts from the
SENC conversion queue.
Note 2: You can view the results of the finished SENC conversions at any time. Click the Conv. History button to
view the conversion log.
To Next Page
Loading...
