29. Conning Display
29-5
29.2.7 Autopilot FAP-2000 window
The Autopilot FAP-2000 window displays the following information:
• SET ROT: Current set rate of turn based on current speed and set turning
radius.
• SET COURSE: Current set course.
• MODE: Indicates selected steering mode.
• PLAN SPEED: Planned speed in current leg of the monitored route.
• ACK. WARNING: Steering-related alerts displayed in lower status bar of
ECDIS are also displayed on the conning display.
This is called the Autopilot FAP-2000 existed window, where the following
additional information is available:
• SET RADIUS: Indicates selected radius for turn.
• PROG CRS: Course after turn designed by program course change or
program track steering mode.
• SET COURSE: Current set course.
• SET HDG: Calculated heading for ship based on SET COURSE and
DRIFT. This information is available when the program track steering is in
use
• MODE: Current turning mode.
Autopilot FAP-2000 order window for DNV specification
SET COURSE xxx.x deg
SET RADIUS x.x NM
SET ROT xxx.x deg/min
SET SPEED xx.x kn
MODE (steering mode)
ACK. WARNING (steering related warning)
To Next Page
Loading...
