Furuno FEA-2807 - How to Insert User Chart Symbols, Lines and Areas in Chart Alert

11. Chart Alerts
11-4
11.3 How to Insert User Chart Symbols, Lines and
Areas in Chart Alert
Symbols
For user chart symbols, use the option Danger Symbol in the Symbol page of the Plan User Chart dialog box. To
display this box, do the following:
1. Click UserChart in the information area to show the User Chart dialog box.
2. Click the Plan button.
3. Put the cursor on the black triangle on the Plan User chart dialog box the push the left mouse button.
4. Click Select or Create.
5. Select or enter user chart number then click the OK button.
6. Click the Symbol tab.
To include symbols in the chart alert, first check the Enables changes box then check the Danger Symbol box of the
Plan User Chart dialog box. Danger Symbol must checked, otherwise danger symbols of a user chart cannot not be
used in the chart alert. The dangerous symbol is drawn in red instead of dark yellow (color may be different
depending on Palette in use). Also, it is necessary to create a user chart. See section 15.7 "How to Create a User
Chart".
In the Symbol page, you can
include symbols in the chart
alert by checking Danger
Symbol.
Danger Symbol
Lines
To include lines in the chart alert, check the Danger Line box in the Line page of the Plan User Chart dialog box.
Danger Line must checked, otherwise danger lines of a user chart cannot not be used in the chart alert. The
dangerous line is drawn in red instead of dark yellow (color may be different depending on Palette in use).
In the Line page, you can
include lines in the chart alert
by checking Danger Line.