8. Vector Chart Material
8-76
8.9.8 Control of predefined IMO Chart Display Settings
There are three sets of predefined Chart Display Settings that can be used to display Charts with certain chart
features. The predefined Chart Display Settings are as follows:
• IMO-Base
• IMO-Standard
• IMO-All Other
You can find display setting in use on upper status bar. See section 3.1 "ECDIS Overview".
To select desired IMO Chart Display Settings, do the following:
Graphical indication
Alarm/Warning
Safety contour
Chart Display
1. Open the Chart Display window, put the cursor on the black triangle on the Chart
Display window then press the left mouse button.
2. Select Set IMO Base, Set IMO Standard or Set IMO All Other from the menu.
To Next Page
Loading...
