Furuno FEA-2807 - How to Reset (Emptying) Voyage and Danger Targets Logs; How to Make a User Chart from a Log (Past Track)

24. Recording Functions
24-11
24.9 How to Reset (emptying) Voyage and Danger
Targets Logs
It may be useful to reset (empty) the Voyage and Danger Targets logs when you are starting a new voyage. If
necessary, make a backup copy before resetting. To reset a log, do the following:
1. Spin the scrollwheel to show Menu/Info/Chart Menu in the mouse functions area
then push the left mouse button.
2. Select Record from the menu then push the scrollwheel.
3. Select Reset from the menu then push the scrollwheel.
4. Select the log to reset from the menu then push the scrollwheel.
5. The system will ask you if you are sure to reset selected log. Click the OK button
to reset the selected log.
24.10 How to Make a User Chart from a Log (past
track)
You may create a user chart from any log among Details, Voyage and Danger Target. The past track of the Danger
Log target is useful for making a user chart from a single target.
1. Spin the scrollwheel to show Menu/Info/Chart Menu in the mouse functions area then push the left mouse
button. Select Record from the menu then push the scrollwheel.
2. Select the log (Details, Voyage, Danger Target) from which you want to make a user chart then push the
scrollwheel.
3. Click the OK button to continue.
4. Select the log entries that you want to use to create a user chart.