Furuno FEA-2807 - A5.3 Automatic Display until Setting; A5.4 How to Remove C-MAP Charts from the System

Appendix 5: C-MAP CM-93/2 Charts
AP-86
A5.3 Automatic Display Until Setting
Display data may be set to system data automatically.
1. Open the Chart menu, select System and SENC Convert Settings to show the following window.
2. Check Automatic Display Until.
A5.4 How to Remove C-MAP Charts from the System
To remove C-MAP charts from the system, do the following:
1. Open the Chart menu.
2. Select Remove Charts from the menu then push the
scrollwheel. The window shown right appears.
3. Select desired chart cells to remove them from the
system. You can remove native data (A, B, CD-
ROM; E, F or Z) or SENC format (snc).
4. Click the Remove button to remove selected C-
MAP charts from your hard disk.