Furuno FEA-2807 - How to Insert a Waypoint; How to Delete a Waypoint

13. Route Planning
13-12
1. Click Route in the information area then click the Plan button to open the Plan Route dialog box. Click the
WPT tab to open the WPT page. Check Enable changes.
2. Select last waypoint as current waypoint.
3. Click the Insert after button in the Waypoints page. Enter direction and distance for waypoint then click the
OK button.
INSERT/MODIFY NEXT WPT
Current WPT: 1
Next WPT
NM
OK
13.5.5 How to insert a waypoint
If you want to insert a waypoint between two waypoints, use the Insert before button, on the WPT page. This
inserts a waypoint next to current waypoint. For example, you want insert a new waypoint between waypoints 6 and
7. Select WPT 7 then click the Insert before button. The WPT is highlighted on the WPT list.
13.5.6 How to delete a waypoint
To delete a waypoint, do the following:
1. Click Route in the information area then click the Plan button to open the Plan Route dialog box. Click the
WPT tab to open the WPT page. Check Enable changes.
2. Highlight the WPT number on the WPT list that you wish to delete, or put the cursor directly on the waypoint
on the screen.
3. Click the Delete WPT button.