Furuno FEA-2807 - Catalogue of S57 Cells

8. Vector Chart Material
8-26
8.5.2 Catalogue of S57 cells
An S57 catalogue is used to view graphical coverage of the charts stored in your hard disk, available in a named
"CD-ROM" or available from an RENC. Available charts are displayed using their limits of charts. Sometimes the
real coverage of a chart may be considerably less than its declared limits. To view information contained on a chart
pick a location with the cursor.
To display the catalogue, do the following:
1. Spin the scrollwheel to display Menu/Info/Chart Menu in the mouse functions area then push the right mouse
button.
2. Spin the scrollwheel to select Chart Catalogue then push the scrollwheel.
1.
2.
3.
5.
4.
 CD  RENC  SENC  C-Map
kn
kn
kn
+
60 ° 03.400'N 1.453 NM
024
° 58.372'E 352.0 °
HDG (MAN) 289.0 °
SPD (MAN) 0.0kn
SB (MAN) 0.0kn
COG (MAN) 289.0
°
SOG (MAN) 0.0kn
1. Source of Chart Catalogue
• CD: Display charts available in a named "CD-ROM".
• RENC: Display charts available from an RENC.
• SENC: Display charts stored in your hard disk in SENC format.
• C-Map: Display charts available from C-MAP. (If C-MAP charts are not installed, "C-Map" does not appear.)
2. View Filters
• Name: Display also cell names in graphical coverage display.
• Permit: Display only charts for which you have permit.
• RENC Cancelled Charts: Display charts that are cancelled in an RENC.
• Group: Display charts that are member of selected group.
• Navigation purpose: Display charts for selected navigation purpose (overview, general, coastal, approach,
harbour, berthing).