Furuno FEA-2807 - How to Get Started with ARCS Charts

9. Raster Chart Material
9-13
If ARCS format is active, you can select ARCS License from the Chart menu, with "License". License information
is shown in the window. This window contains information about the license type and license number.
ARCS License information window
9.5 How to Get Started with ARCS Charts
Copy ARCS permit from floppy disk to USB memory. Then, do the following:
1. Load permit from USB memory by using Chart Permits in the Chart menu. See section 9.6 "How to Load,
Remove Chart Permits for ARCS Navigator License".
2. Load System files from the latest ARCS weekly Update CD-ROM. See section 9.10 "How to Update ARCS
Charts".
3. Load chart from ARCS CD-ROMs. See section 9.9 "How to Load a New ARCS Chart into the System".
4. Load update from a Weekly CD-ROM. See section 9.10 "How to Update ARCS Charts".
5. Open desired chart from the Chart menu by using the Open Chart or Chart Catalogue command.
For new Update CD-ROM, continue from step 3.
To put another chart in the system, continue from step 1.