13. Route Planning
13-17
13.7 WPT Report
This report is generated when you select Report from the Plan Route menu. To display the report viewer, click
Route in the information area, click the Plan button, put the cursor on the triangle in the Plan Route dialog box,
select Report then push the scrollwheel. To close the report viewer, click X in the right corner of the report viewer.
You can print the report by clicking the Print Text button.
WPT report consists information of:
• Position of waypoints
• Planned speeds • Estimated times of arrival (ETA)
• Planned courses • Planned fuel consumption
• Distances between waypoints. Distance is not
directly calculated from LAT and LON values of
WPTs location, but the distance is shorter distance
compensated for planned radius for each waypoint.
• Total distance of route. Distance is not directly
calculated from LAT and LON values of WPTs
location, but the distance is shorter distance
compensated for planned radius for each waypoint.
How to change size of font used in report
If you want to change
the size of the font for
the report:
1. Put the cursor on
the triangle in the
report window.
2. Select desired
option from the list
then push the
scrollwheel.
[Text View]
Print Font Size: 8
Print Font Size: 9
Print Font Size: 10
Print Font Size: 11
Close
To Next Page
Loading...
