29. Conning Display
29-11
29.2.15 Azimuth propulsion window
Two different types of azimuth propulsion windows are available and one is selected during the installation. The
content of this window is defined with Azimuth in the Installation parameters.
29.2.16 Speedpilot window
kn
kn
kn
kn
kn
kn
kn
kn
kn
kn
kn
kn
kn
kn
kn
kn
The speedpilot window displays the following data:
• ROUTE: Optimization type for monitored route.
• PLAN LEG: Planned speed for current leg (based on plan).
• SUGGESTED: If optimization type is "timetable", then this indicates
suggested speed to keep the timetable. For other optimization types this is
blank.
• SPEEDPILOT: Selected mode in Speed Pilot, OFF, SET or PLAN.
• ACTUAL: Speed and source of the speed used by the speedpilot.
• SET: Set position of handle and set speed of speedpilot during operation
mode SET of the speedpilot. Blank during other operation modes.
• PLAN: Set position of handle and set speed of speedpilot during operation
mode PLAN of the speedpilot. Blank during other operation modes.
The last row is reserved for alert indication. The speedpilot display shows alerts
as ALnn, where nn is the number of the alert. The conning display shows the
speedpilot alert as self-explanatory text.
To Next Page
Loading...
