Furuno FEA-2807 - Access Server Log

18. Common Reference System
18-11
18.6.1 Access server log
The access server log is used to analyze and diagnose access server operations. Service personnel can use this log to
check the access server for proper operation. To access the access server log, do the following:
Function keys
Operation
X
Parameter backup
Digitizer
Backup and Restore
Installation parameters
Navigation parameters
X
Chart Alert parameters
Optimization parameters
X
Print Navigation parameters X
Print Optimization parameters X
Selftest
Standby
Presentation Library
Access Server and Diagnostic
X
Close
1. Put the cursor below the Lost TGT alarm indication, confirm that Initial
Settings is shown in the mouse functions area then push the right mouse
button.
2. Put the cursor on the triangle in the dialog box to display the menu shown
left.
3. Select Access Server and Diagnostic from the menu and select Access
Server Log from the sub menu.