24. Recording Functions
24-10
How to change font size for hard copy of logs
In each log (Details, Voyage or Danger Targets log) you can select font size for printed version. To change font size,
do the following:
1. Open desired log.
2. Put the cursor on the triangle at the upper left corner and select Print Font.
3. Select desired font size.
24.8 How to Make Backup Copy from Logs
If necessary you can make a backup copy of ECDIS logs onto a floppy disk or a USB memory as follows:
1. Spin the scrollwheel to show Menu/Info/Chart Menu in the mouse functions area then push the left mouse
button.
2. Select Record from the menu then push the scrollwheel.
3. Select Backup and Restore from the menu then push the scrollwheel. The Backup and Restore dialog box
appears.
To Next Page
