Furuno FEA-2807 - How to Select Notes Record to Modify; How to Change Notes Record Position; How to Change Other Data of Notes Record; How to Delete a Notes Record

16. Notes
16-8
To add a new Notes record by Add button:
1. Open the Edit page of the Plan Notes dialog box then check Enable changes.
2. Click the Add button. This adds a new Notes record to the end of record, and it is a copy of current Notes
record.
3. Modify position of Notes record. For how to modify position, see section 16.6.3 "How to change Notes record
position".
4. Modify other data of Notes record as appropriate. For how to modify other data in a Notes record, see section
16.6.4 "How to change other data of Notes record".
16.6.2 How to select Notes record to modify
The Current box in the Plan Notes dialog box shows the Notes currently selected for modification. To select a
different Notes the following methods are available:
• Enter desired record number in the Current box, using the scrollwheel; spin the scrollwheel to select record
number then push the scrollwheel.
• Put the cursor on desired Notes in the electronic chart area, then push the scrollwheel.
16.6.3 How to change Notes record position
To change the position of a Notes, two choices are available:
• Enter latitude and longitude in the Position field on the Edit page.
• Drag and drop Notes mark using the trackball and left mouse button.
How to enter latitude and longitude in position field
1. Open the Edit page of the Plan Notes dialog box then check Enable changes.
2. Select desired Notes, following section 16.6.2 "Choosing Notes record to modify".
3. Enter co-ordinate in Lat (Lon) field as appropriate. Spin the scrollwheel to change digit then push the
scrollwheel to confirm.
How to drag and drop Notes to next WPT position
1. Open the Edit page of the Plan Notes dialog box then check Enable changes.
2. Use the trackball to put the cursor on the Notes you wish to move.
3. Press and hold down the left mouse button while rolling the trackball to position the Notes mark where desired.
Keep the button pressed and held down while you move the cursor and release it when the cursor is at position
desired.
16.6.4 How to change other data of Notes record
To change function range or character data of Notes, such as range and text, do the following:
1. Select desired Notes record, following section 16.6.2.
2. Put the cursor in the desired edit box, spin the scrollwheel to select desired value, then push the scrollwheel to
confirm.
16.6.5 How to delete a Notes record
To delete a Notes record, do the following:
1. Open the Edit page of the Plan Notes dialog box then check Enable changes.
2. Select desired Notes record to delete, following section 16.6.2.
3. Click the Delete button.