4. Control Units
4-4
In the example in the figure at the bottom of page 4-3, the function of each hot key is as below:
F1: Opens Chart Display dialog box.
F2: Sets Standard Display settings on display.
F3: Opens Chart menu.
F4: Acknowledges alerts generated by ECDIS.
8. Click the X mark at the top right corner to close the dialog box.
4.4.2 How to activate a menu or function with a hot key
Press the hot key corresponding to the menu or function you wish to activate.
4.5 Mouse Operations
4.5.1 Parts of the mouse
The mouse consists of the trackball, scrollwheel, left mouse button and right mouse button.
F1
F2
F3
F4
Left Button
Right Button
Scrollwheel
Trackball
Mouse parts (pictured: RCU-015)
4.5.2 How to enter alphanumeric data
Alphanumeric input fields are activated for input by pointing with the mouse cursor and clicking the left mouse
button. This action also displays minimum and maximum values beside the input field. You select the input value by
spinning the scrollwheel then push the scrollwheel to accept the value. (Alphanumeric data may also be entered
directly from the keyboard-equipped control unit.)
To change a specific digit or alphabet, roll the trackball to put the cursor to the left of the digit or character that you
want to change then spin the scrollwheel to select appropriate alphanumeric character.
To Next Page
Loading...
