13. Route Planning
13-8
13.4.3 How to use the Check page
The Check page allows you to make safe water calculation for your route. You also store the names of the user chart
and Notes to use during route monitoring together with planned route on this page. This storage happens when you
activate the safe water calculation by pushing the Start button. They are stored under the names of the planned user
chart and planned Notes.
Alerts by leg
Legs by alert
Alerts: 11
Legs by alert
Alerts by leg
Alert:
Alerts:
Planned Notes
WPT
The time used for the Chart Alert check is subject to the chart
database and route distance. When the Start button is clicked, the
dialog box shown right appears as a reminder. To continue, click
the OK button.
If the selected scale for displayed chart(s) is smaller than 1:5000
000, chart alert calculation is not performed. In this case use the
scale range 1:1 000 – 1: 500 000.
Note 1: In order to display charts with correct updated situation,
always use the current date during your voyage. If your voyage
lasts more than one week, set the current date at least once per
week during your voyage.
Note 2: In order to display charts with correct updated situation
during route planning, always use planned date of each waypoint to
check your plan.
To Next Page
Loading...
