9. Raster Chart Material
9-16
9.8 How to Remove Chart Permits
Normally you do not need to remove permits during normal operation. However, it may be necessary to remove
chart permits from the system. Permits may be removed individually or collectively.
To remove chart permits, do the following:
1. Open the Chart menu then select Chart Permits from the menu.
2. To remove all permits, click the Select All button then click the Remove button.
To remove an individual permit, use the cursor to select the permit then click the Remove button.
3. Check that selected permits have been removed. Close the window by clicking the X on the window.
To Next Page
Loading...
