14. Route Monitoring
14-12
14.11 Route Monitoring Alerts
Auto steering in use
352 Route: Illegal ETA WPT: Appears when the system cannot use the selected ETA waypoint. The reason might
be corrupted or missing route file.
353 Route: Illegal To WPT: Appears when the system cannot use the selected "To WPT". The reason might be
corrupted or missing route file.
354 Route: Illegal final WPT: Appears when the system cannot use the selected final waypoint. The reason might
be corrupted or missing route file.
360 Route: WPT CHG disabled: Appears when you try to change next or final waypoint while the system is in
automatic route steering. Leave automatic route steering then change the waypoint.
363 Route: Select disabled: Appears when you try to select a new route for route monitoring while the system is in
automatic route steering. Leave automatic route steering then select a new route.
364 Route: Cancel disabled: Appears when you try to cancel current monitored route while the system is in
automatic route steering. Leave automatic route steering then cancel the current route.
454 Route: End reached: Appears when own ship passes the last waypoint. The system cancels current route
monitoring. Normally this alert only appears if alert 458 is left unacknowledged.
457 Route: Outside chl limits: Appears if own ship is outside the monitored channel.
Auto steering not in use
451 Route: WPT approach alarm: Appears when own ship is "x" minutes from the wheel over point of the next
waypoint, "x" being the time specified.
458 Route: Last WPT approach: Appears when own ship arrives "x" minutes from the last waypoint, "x" being
the time specified. Acknowledgement of this alert cancels current route monitoring.
To Next Page
Loading...
