Furuno FEA-2807 - Rudder Window; Position Window; Drift and Radius Window

29. Conning Display
29-4
29.2.4 Rudder window
The rudder window shows the following information:
First rudder and source of the first rudder. In this example the source is actual
rudder (ACT).
Second rudder and source of the second rudder. In this example the source is
ordered rudder (ORD).
In this example only one rudder is connected.
Double rudder window for actual and order rudder.
To get this window, the size of the speed window should be set to "small size or
small with double window". For information, see the installation manual.
Double rudder window for actual and order rudder. Numerical value for ordered
rudder position available.
29.2.5 Position window
Local time UTC time
UTC time and local time
The position window shows the following
information:
• LAT and LON of your ship's position
• Source of your ship's position. See
Chapter 19 "Navigation Sensors".
• Local time and/or UTC time
depending on selection made during
the installation. Current date and time
used in the ECDIS.
29.2.6 Drift and radius window
The drift and radius window shows the following information:
• SET RADIUS: Current set radius on Autopilot FAP-2000.
• ACT RADIUS: Current radius of turn.
• HDG: Current heading
• DRIFT: Direction and angle of drift.
• COG: Course over ground and its source.