Furuno FEA-2807 - How to Create New Notes; How to Add New Notes Record

16. Notes
16-7
16.6 How to Create New Notes
You can create and modify Notes, and this can be done in the planning mode. It is recommended to use the true
motion display mode while editing.
Select Notes
Monitor

Plan

X
DISP
DISP
3.1.
2.
Enter name of the new Notes
To create a new Notes, do the following:
1. Click Notes in the information area then click the Plan button to show the Plan Notes dialog box. Click the
triangle mark, select Create from the menu then push the scrollwheel.
2. Enter a name for the Notes; spin the scrollwheel to select character then push the scrollwheel. Repeat to enter
name desired then click the OK button.
3. In the Edit Record page of the Plan Notes dialog box, check "Enable changes". Roll the trackball to put the
cursor on the location desired for Notes then push the left mouse button. In the Range box, enter the range from
your ship at which to activate the Notes. To show text message on the screen, enter desired message in the
Description window; spin the scrollwheel to select character and push the scrollwheel to confirm.
16.6.1 How to add new Notes record
To add a new Notes record the following choices are available:
• Using the left mouse button.
• Using the Add button in the Edit page.
To add a new Notes record by using the left mouse button:
1. Open the Edit page of the Plan Notes dialog box and check Enable changes.
2. Put the cursor on the location in the chart area where you want to add a new Notes, then push the left mouse
button. New Notes record appears at the end of file.
3. Modify Range, Position, text message, etc. as appropriate.