16. Notes
16-6
16.5 How to Select Notes to use in Planning Mode
If "Notes" in the information area is black (or white depending on color scheme) this means that the workstation is
in the monitoring mode for Notes. To activate the planning mode and select Notes for the planning mode, do the
following:
Move cursor over this
and use scrollwheel
to select Notes in
planning mode
Select Notes
Monitor
Plan
X
DISP
DISP
(WT)
16.5.1 Plan Notes dialog box description
Edit Record box: Shows current number of active records.
LAT, LON: Latitude and longitude position of current record.
Alert: Range from own ship at which current Notes is activated on the screen or
when passing notes distance is fixed to 10 NM.
Description: The operator may edit a Notes message record, which appears on
the screen, after the ship has passed the calculated point. To edit the text, put the
cursor in the text window, spin the scrollwheel to select character then push the
scrollwheel.
Add: This function adds a new record next to current record. User can edit
position by entering new co-ordinates or by choosing new location with the
trackball then pushing the left mouse button.
Import: You may import an existing file (whole file or part of file), to current
Notes file.
Delete: Deletes current record of Notes.
Enable changes: Check to enable changes.
Note: Notes may only be modified in the North-up or Course-up mode.
To Next Page
Loading...
