Furuno FEA-2807 - How to Remove S57 Chart Cells from the System

8. Vector Chart Material
8-29
8.5.4 How to remove S57 chart cells from the system
How to remove specific chart cells from the system
To remove an S57 format vector chart cell from the system, do the following:
1. Select Remove Charts from the Chart menu.
2. Select chart cells to remove from the system. You can remove Base cell (000), updates (001…) and SENC
format (snc).
3. Press the Remove Chart button. The window shown below appears.
4. Confirm removal by clicking the OK button. The system will remove file(s) from the hard disk.