Furuno FEA-2807 - How to Select Source of Radar Overlay; Radar Overlay Via LAN from FAR-2 X07 Radars; Radar Overlay Via Radar Overlay Card Inside ECDIS

23. Radar Overlay
23-2
23.3 How to Select Source of Radar Overlay
23.3.1 Radar overlay via LAN from FAR-2x07 radars
Put the cursor on Radar in the status bar to show the Radar selections window. The item "Radar overlay source"
shows the current source for the radar overlay. In the example display below the source is MAST X. If there are
more than one radar video source available, you can change the radar overlay source by clicking Radar Overlay
source then spin the scrollwheel to select a source.
23.3.2 Radar overlay via radar overlay card inside ECDIS
If there is more than one radar video source available and they are connected to the ECDIS, you can use external
switch to select desired source of the radar video overlay. Selected source is displayed on the Radar Overlay dialog
box.
In case of LAN Radar Overlay