Furuno FEA-2807 - Human Interface Log

18. Common Reference System
18-12
18.6.2 Human interface log
The human interface log is used to analyse and diagnose system operations. Service personnel can use this log to
check the system for proper operation. To activate the human interface log, do the following:
Function keys
Operation
X
Parameter backup
Digitizer
Backup and Restore
Installation parameters
Navigation parameters
X
Chart Alert parameters
Optimization parameters
X
Print Navigation parameters X
Print Optimization parameters X
Selftest
Standby
Presentation Library
Access Server and Diagnostic
X
Close
1. Put the cursor below the Lost TGT alarm indication, confirm that Initial
Settings is shown in the mouse functions area then push the right mouse
button.
2. Put the cursor on the triangle in the dialog box to display the menu shown
left.
3. Select Access Server and Diagnostic from the menu and select Human
Interface log from the sub menu.