Furuno FEA-2807 - How to Select an Active Group; How to Remove a Group; How to Remove ARCS Charts from the System; How to Manually Remove an ARCS Chart

9. Raster Chart Material
9-28
9.12.4 How to select an active group
You can make a group an active group as follows:
1. Open the Chart menu. Select Chart Catalogue from the menu.
2. Click Groups in the View Filters window.
3. Select desired group from the Edit Group list box.
9.12.5 How to remove a group
You can remove a group from the hard disk as follows:
1. Open the Chart menu. Select Chart Catalogue from the menu.
2. Select desired group from the Edit Group list box.
3. Click the Edit Group button followed by clicking the Remove button. Click the OK button to confirm.
9.13 How to Remove ARCS Charts from the System
You can remove ARCS charts from the system, manually or by active group.
9.13.1 How to manually remove an ARCS chart
[Remove Charts]
By Group
Manual
Go Back
1. Open the Chart menu.
2. Select Remove Charts from the menu and Manual from the sub menu to show
the Chart Operations window.
3. Select desired charts to remove them from the system.
4. Click the Remove Chart button to remove selected charts from the hard disk.