23. Radar Overlay
23-9
23.7 Radar Overlay Related Alerts
Alerts generated by Radar Overlay are related to ECDIS workstation where Radar overlay card is located. This
means that Radar overlay related alerts on first ECDIS workstation starts with alert number 100 and Radar overlay
related alerts on the No.2 ECDIS starts with alert number 200.
Alert number 100: RADOV NO HEADLINE 6/13
------------------------------------
NO HEADLINE AVAILABLE FOR RADAR
OVERLAY. CHECK CONNECTORS AND
CABLING FOR RADAR OVERLAY.
Alert number 101: RADOV NO AZIMUTH 6/13
------------------------------------
NO AZIMUTH AVAILABLE FOR RADAR
OVERLAY. CHECK CONNECTORS AND
CABLING FOR RADAR OVERLAY.
Alert number 102: RADOV NO TRIGGER 6/13
------------------------------------
NO TRIGGER AVAILABLE FOR RADAR
OVERLAY. CHECK CONNECTORS AND
CABLING FOR RADAR OVERLAY.
Alert number 103: RADOV NO VIDEO 6/13
------------------------------------
NO VIDEO AVAILABLE FOR RADAR
OVERLAY. CHECK ADJUSTMENT OF GAIN ON
ON RADAR OVERLAY. CHECK CONNECTORS
AND CABLING FOR RADAR OVERLAY.
Alert number 104: RADOV NO GYRO 6/13
------------------------------------
NO HEADING REFERENCE AVAILABLE FOR
RADAR PROCESSOR WHICH IS SOURCE FOR
RADAR OVERLAY. CHECK RADAR PROCESSOR.
Alert number 105: RADOV HW FAILURE 6/13
------------------------------------
RADAR OVERLAY HARDWARE FAILURE.
SWITCH POWER ON/OFF. REINSTALL
ECDIS SW.
Alert number 106: LAN RADAR CONNECT FAILURE 6/13
------------------------------------
INDICATION WHILE LAN CONNECTION FOR
RADAR FEATURES IS ESTABLISHED BETWEEN
ECDIS PROCESSOR AND RADAR PROCESSOR.
Alert number 107: LAN RADAR DLL FAILURE 6/13
------------------------------------
FAILURE TO ESTABLISH LAN CONNECTION
FOR RADAR FEATURES BETWEEN ECDIS
PROCESSOR AND RADAR PROCESSOR.
CHECK LAN CONNECTORS AND CABLES
POWER ON/OFF AND REINSTALL ECDIS SW.
To Next Page
Loading...
