Furuno FEA-2807 - 25 Anchor Watch; Introduction; How to Activate Anchor Watch

25-1
25. Anchor Watch
25.1 Introduction
The anchor watch feature checks to see if your ship is drifting when it should be at rest. Set the limit for the anchor
watch on the menu. If your ship drifts more than the distance set, the alert "874: Anchor watch" appears.
Your ship's position, where
you start the anchor watch.
Alarm
setting
: Alarm triggered
25.2 How to Activate Anchor Watch
To activate the anchor watch:
1. Open the main menu.
2. Select Anchor Watch.
3. Enter desired value in the Drag circle field.
4. Drop the anchor then click the Drop Anchor button.
5. To start anchor watch, click the Start Anchor Watch button.
If your vessel travels more than the distance set here, the alert "874: Anchor watch"
appears. To continue to use the anchor watch, click the Clear Anchor button to set the
alarm about your current position.