3. ECDIS Display
3-7
How to open the sidebar
Sidebar(s) may be opened as shown below. Two sidebars may be displayed.
1. Put the cursor on the area shown.
2. "Select Sidebar" appears in the mouse functions area.
See figure at right.
3. Click the right mouse button to show the sidebar
menu on the display.
4. Spin the scrollwheel to select desired sidebar from the
menu then push the scrollwheel.
To remove an item from the sidebar, deselect it
following this procedure.
Note: The autopilot sidebar is shown when "Track
Control" is set to "Yes".
1.
3.
2.
OFF
T VECT(G) 5 min
Predictor OFF
PASTPOSN T 2min
CPA 10.0NM 30min
CPA AUTO act FILT
Lost TGT alarm FILT
SINGLE xx.xx xx.xx
(WT)
To Next Page
Loading...
