Appendix 5: C-MAP CM-93/2 Charts
AP-69
How to load serial number of CD-ROM
Each CD-ROM has an individual serial number that is used to identify the operator of C-MAP charts. In order to
load the serial number into the ECDIS, do the following:
1. Spin the scrollwheel to show Menu/Info/Chart Menu in the mouse functions area then push the right mouse
button.
2. Select Chart Permits from the menu then push the scrollwheel.
[Chart Menu]
3. Click the Non-HO button to show the following window..
4. In the NON-HO User/Auth Code window, click the Load CD Ser no. button.
5. Insert your C-MAP CD-ROM in the CD-ROM-drive and select desired drive.
6. The CD-ROM serial number is shown in the SerNo field.
To Next Page
Loading...
