8. Vector Chart Material
8-16
You do not have all the published updates
If you tried to load updates and you
missed one or more updates between
updates already loaded into your
hard disk and the updates that you
are loading, you get this message.
The message above indicates that you tried to load update numbers 3, 4 and 5 when at least update 2 and possibly
update 1 were not available in your hard disk. Check the content of your CD-ROMs to find the missing
update/updates or contact your chart supplier.
The message above clearly indicates that this chart is not up-to-date and thus it does not fulfil SOLAS requirements.
Get the latest edition of the chart from the publisher immediately.
Unsafe chart has been cancelled by the publisher
If you load an update that contains
instructions from the publisher to
cancel the chart, you get this
message.
Normally, you should accept the cancellation by clicking the Yes button. Then the system automatically removes the
chart from the hard disk and from your chart screen.
You may elect to keep the chart although its publisher has informed you that the chart has been cancelled. A reason
for keeping the chart might be that you do not have anything better available. In this case, click the No button. Then
the system automatically removes the ENC status from the chart, because the chart does not conform to ENC
standards.
Note that the cancellation message above clearly indicates that the publisher says that this chart is unsafe for
navigation and thus it does not fulfil SOLAS requirements. Get the latest edition of the chart from the publisher
immediately to replace the unsafe cancelled chart.
To Next Page
Loading...
