3.13.5 How to Setup E-mail to MMS Service
If the Voluson E-Series is connected to the Internet (via LAN, Wi-Fi or Cellular modem) and E-mail service is
configured properly, it is possible to send images as an MMS.
Note
MMS are sent by e-mail to a 3rd party provider (e.g. SMSglobal). This service needs to be ordered by a 3rd
party provider.
Registration of MMS Service
To use the MMS feature you need to contract with a 3rd party provider which offers E-mail to MMS service
(e.g. SMSglobal). Please contact the service provider!
How this feature works
Voluson E-Series sends an E-mail with an attached image to the E-mail to MMS service. The MMS phone
number is encapsulated in the recipient E-mail address
MMS Options
1. Press the Utilities key on the control console.
2. In the “Utilities” menu touch the
Setup
button to invoke the setup desktop on the screen.
3. On the right side of the screen select
Connectivity
and then click the
Device Setup
tab.
4. Click the
Email Configuration
button; see
Figure 3-44 on page 3-58
.
5. In the Email Configuration screen check box "
Use Email to MMS Service
" and then click on
Settings
.
Figure 3-54 check box
The Email to MMS Service Settings window appear.
Figure 3-55 Email to MMS Service Settings
Note
The configuration above works with SMSglobal.
6. Enter the Domain Name from 3rd party E-mail to MMS service.
Note: An E-mail to phone number@Domain Name for MMS Email is sent!
7.
Store your configuration with click on
OK
.
8. Individually enter Patient's Email address and Phone number in the PID screen and adjust Email
and/or MMS options as described in
Section 3.13.6 on page 3-68
.
Setup Instructions
Voluson E-Series Service Manual
5539550APB Revision 6
3-67
To Next Page
Loading...
