7.8.5 Monitor Troubleshooting
Fault symptom Check these items
No image Check the power cord is properly connected.
Check the video cable is properly connected.
Check no pins of the video cable are bent.
Check if video is present on backplane.
Picture is fuzzy Adjust the picture contrast and picture brightness. Some SVGA cards having an
excessive video output level will cause a fuzzy picture at the maximum contrast
level.
Video test patterns are not clear,
bright, parallel or square
Replace the monitor.
Note
For further details see Section 6.2 "LCD Monitor Adjustment" on page 6-2 .
Diagnostics/Troubleshooting
Voluson E-Series Service Manual
5539550APB Revision 6
7-27
To Next Page
Loading...
