GE Voluson E Series User Manual

7.8.8 Activate Windows - Network Connectivity Issues
Issue: In case of network connectivity issues, it may not be possible to activate your Windows operating system on the
Voluson E-Series systems. Monitor screen display:
Activate Windows. Go to Settings to activate Windows.
Note:
When present, the "Activate Windows" message will not impact system performance in any way.
Cause: Activation servers of Microsoft are not reachable.
Solution: 1. Check Operating System License Status in Utilities - Setup - Administration - System Info tab.
a.
Licensed -> Windows is properly activated.
b. Notification -> Windows is not activated. Proceed with troubleshooting steps.
Figure 7-34 Licence Status: NOTIFICATION => Windows is not activated
2. Make sure that the Voluson E-Series system is connected to the internet.
3. Contact your local IT department to make sure that inside your local network infrastructure activation servers of
Microsoft are reachable. If needed, contact your GE service technician for further support.
Diagnostics/Troubleshooting
7-32
Voluson E-Series Service Manual
5539550APB Revision 6

GE Voluson E Series Specifications

General

Brand	GE
Model	Voluson E Series
Category	Medical Equipment
Language	English