GE Voluson E Series User Manual

3.5.8 Connecting the Wireless Network Adapter
1.
Turn ON the power of the system and wait till the system has booted.
2. Plug the Wireless Network adapter into an accessible USB port of the Voluson E-Series. All software
drivers are pre-installed for the designated Wireless Network adapter only.
The Wireless Network Adapter can be connected to any accessible USB port.
Figure 3-21 Connection Scheme - Wireless (USB) Network Adapter
Note
Connection is always the same (no differences between PC-Motherboard version of the Voluson E-Series
system).
Note After physical connection of the WLAN adapter to the Voluson E-Series system, follow the procedure
described in Section 3.13.2 "Wireless Network Configuration" on page 3-59 .
Setup Instructions
3-28
Voluson E-Series Service Manual
5539550APB Revision 6

GE Voluson E Series Specifications

General

Brand	GE
Model	Voluson E Series
Category	Medical Equipment
Language	English