GE Voluson E Series User Manual

3.13.8 InSite Configuration
Prerequisites for InSite Setup
If not already available, collect the following information from the hospital network administrator:
1.
Proxy Server, if necessary
__________ / __________ / __________ / __________ and Port ________
2. Proxy Authentication, if necessary
User ____________________________________ and Password
_________________________________________
Configuration Steps
At EC330 (BT18) systems the trackball functions are displayed in the trackball status area of the screen.
For fast access to the Configuration page move the cursor to
the InSite link (
GE icon at the right bottom of the display screen)
and then press the upper trackball key.
1. Enter the Common Service Desktop (CSD).
Note
There are different possibilities to access the Common Service Desktop and its available features; see
Section 5.12.2 "Service Platform - Access and Security" on page 5-48 .
2. Select the Configuration page, then double-click InSite ExC Agent Configuration (A).
Note
This example shows fictional numbers!
Figure 3-59 Common Service Desktop - Configuration
3. Fill out at least all bold stated mandatory fields in the Agent Configuration section (B).
-
The Device Name (pre-populated) and the CRM field have to be prefix KE6 or KE8 + systems
serial number without prefix letter; e.g. KE810026.
-
Select Continent and Country from the pull-down menu.
Setup Instructions
3-70
Voluson E-Series Service Manual
5539550APB Revision 6

GE Voluson E Series Specifications

General

Brand	GE
Model	Voluson E Series
Category	Medical Equipment
Language	English