GE Voluson E Series - 5.4 Internal I;O

5.4 Internal I/O
Internal In/Out depends on
•
the currently installed PC Motherboard
•
the BT-version (BT15, BT16, BT17 or BT18)
Note The “Mainboard type” can be read out in the Setup - Administration - SYSTEM INFO page (see Figure 7-1
on page 7-3 ).
Content in this section
5.4.1 Internal I/O Voluson E-Series (BT15): ADVANTECH + RTT/RTH6x - - - - - - - - - - - 5-28
5.4.2 Internal I/O Voluson E-Series (BT15 / BT16): ADVANTECH + RTH50 - - - - - - - - - 5-29
5.4.3 Internal I/O Voluson E-Series (BT15): KONTRON + RTT/RTH6x - - - - - - - - - - - - - 5-30
5.4.4 Internal I/O Voluson E-Series (BT15 / BT16): KONTRON + RTH50 - - - - - - - - - - - 5-31
5.4.5 Internal I/O Voluson E-Series (BT17): ADVANTECH Micro-ATX - - - - - - - - - - - - - - 5-32
5.4.6 Internal I/O Voluson E-Series (BT18): ADVANTECH Micro-ATX - - - - - - - - - - - - - - 5-33
5.4.7 Internal I/O Voluson E-Series (BT18): KONTRON Micro-ATX - - - - - - - - - - - - - - - 5-34
Components and Functions (Theory)
Voluson E-Series Service Manual
5539550APB Revision 6
5-27