8.4 Image Settings Only - Loading Procedure
Introduction
The image settings contain:
•
2D Factory and 2D User Presets
•
3D/4D Factory and 3D/4D User Presets
•
Annotation Presets
•
Scan Assistant Configuration
•
Measure Configuration
•
Biopsy Lines
Loading Procedure
see:
Section 4.4.2 "Load Small Backup (Scan Settings)" on page 4-12
8.5 Full Backup (Full System Configuration) - Loading Procedure
Introduction
The Full Backup contains following data:
•
User Settings (databases and files containing User Programs, 2D/3D/4D Presets, gray curves etc.)
•
System Settings (general "Setup" settings such as Language, Time/Date format, Button configuration,
Annotation settings, Biopsy lines, Peripheral data, Video Norm, Archive configuration, etc.)
•
Measure Configuration (user specific measure setup settings)
•
User Authentication Data (User Authentication Configuration (user names, group names), LDAP
configuration, audit trail configuration,...)
•
Patient Archive (database containing patient demographic exam data and measurements) - no images
•
V830 Settings (Options resp. Permanent Key that is specific for enabled software options and Demo
Key)
•
Image Transfer Configuration (DICOM configuration e.g., DICOM servers, AE Title, Station Name, etc.)
•
Network Configuration (Network settings: IP address, Network Profiles, e-mail configuration, network
printer, network drives, computer name)
•
Service Platform (state of the Service Software)
Loading Procedure
see:
Section 4.4.4 "Load Full System Configuration (Full Backup)" on page 4-17
8.6 Image Archive - Loading Procedure
Introduction
A backup of the Image Archive contains the Patient Archive (database containing patient demographic data
and measurements) + images.
Loading Procedure
see:
Section 4.4.6.2 "Load Image Archive" on page 4-22
Replacement Procedures
Voluson E-Series Service Manual
5539550APB Revision 6
8-15
To Next Page
Loading...
