4.4.6 Archiving Images
Note
It is highly recommended to Backup the Full System Configuration (Section 4.4.3 on page 4-15 ) and the
Image Archive (Section 4.4.6 on page 4-20 ) once a week.
4.4.6.1 Save Image Archive
Note
A backup of the Image Archive always contains the Patient Archive (database containing patient
demographic data and measurements) + images of the selected exams.
1. Press the Utilities key on the control console.
2. In the “Utilities” menu touch the
Setup
button to invoke the setup desktop on the screen.
3. On the right side of the screen select
Backup
and then click the
Image Archive
tab.
Figure 4-20 Setup - Backup - IMAGE ARCHIVE page
4. Click the
Save
button (2).
Figure 4-21 Image Archive Save - preparations
5. Choose archiving span time from the pull-down menu (2).
Note
If for example “All images older than” 1 Day is chosen (see: Figure 4-21 on page 4-20 ), images of the
current day will not be archived! However, if you click the [Advanced] button you can put this right.
6. If desired, check mark “Remove Local Images after Backup” (3).
7. Click the
Advanced
button (1) if it is desired to adapt archive data.
Functional Checks
4-20
Voluson E-Series Service Manual
5539550APB Revision 6
To Next Page
Loading...
