GE Voluson E Series - Save Small Backup (Scan Settings)

4.4.1 Save Small Backup (Scan Settings)
The Image/Scan Settings contain:
•
2D Factory and 2D User Presets
•
3D/4D Factory and 3D/4D User Presets
•
Annotation Presets
•
Scan Assistant Configuration
•
Measure Configuration
•
Biopsy Lines
1.
Insert a DVD/CD+R/RW into the drive or connect an external USB device.
2. Press the Utilities key on the control console.
3. In the “Utilities” menu touch the Setup button to invoke the setup desktop on the screen.
4. On the right side of the screen select Backup and then click the System Configuration tab.
5. Click the Save button (1) of the "Small Backup (Scan Settings)" group.
Figure 4-10 Save window
6. Choose the media (2) and click the
Save button (3).
7. Select the New File... key and enter a file name (without extension).
8. Click the OK key to start the process. When the saving has been completed, click OK .
Functional Checks
Voluson E-Series Service Manual
5539550APB Revision 6
4-11