5.8.4 ECG-preamplifier (MAN - optional)
The ECG-preamplifier is used for acquiring an ECG-signal to be displayed with the ultrasound image. This
optional peripheral serves for gaining an ECG-signal to mark the systolic and end diastolic moments in M-
Mode and Doppler evaluations.
The ECG-preamplifier must not be used for ECG-diagnostics. It is not intended for use as a cardiac monitor
and must not be used for an intra-operative application on the heart.
5.8.5 Wireless Network Adapter
The Voluson E-Series supports a Wireless Network USB Adapter based on industry standards to provide
easy-to-use and compatible high-speed wireless connectivity. For details regarding type and installation, see
Section 3.5.8 "Connecting the Wireless Network Adapter" on page 3-28
.
The Wireless Network USB Adapter provides a mobile network connection to the local area network.
5.8.6 Footswitch
The Footswitch is used for comfortable system control when no hand is free. To adjust function of the
Footswitch (Left/Middle/Right) see
Section 3.7.1.8 on page 3-45
.
5.8.7 Cellular Modem
Connecting the Voluson E-Series to the Internet allows the user to send images via e-mail and/or MMS to
patients or physicians. Whenever no LAN or Wi-Fi Internet connection is available, it is possible to connect
the Voluson E-Series to the Internet by using the optional Cellular Modem. To use this feature the peripheral
Cellular Modem needs to be installed and a SIM card from your local service provider needs to be ordered.
For details regarding installation and configuration see
Section 3.13.3 on page 3-64
.
Components and Functions (Theory)
Voluson E-Series Service Manual
5539550APB Revision 6
5-43
To Next Page
Loading...
