GE Voluson E Series - Erasing DVD;CD

4.3.2 Erasing DVD/CD
1.
Press the Utilities key on the control console.
2. In the “Utilities” menu touch the
Setup button to invoke the setup desktop on the screen.
3. On the right side of the screen select Connectivity and then click the Drives tab.
Figure 4-7 Setup - Connectivity - DRIVES page
4. Click the
Erase CD button to displays the “Erase DVD/CD” window.
Figure 4-8 Erase DVD/CD Window
5. Click the
OK button to start the process.
6. When erasing is finished, select Exit to return to scan mode.
Functional Checks
Voluson E-Series Service Manual
5539550APB Revision 6
4-9