GE Voluson E Series User Manual

4.4.6.2 Load Image Archive
1.
Press the Utilities key on the control console.
2. In the “Utilities” menu touch the Setup button to invoke the setup desktop on the screen.
3. On the right side of the screen select Backup and then click the Image Archive tab.
4. Click the Load button.
Figure 4-23 Image Archive Load - choose destination
5. Choose the destination (1).
6. Click on the backup to be restored (2). Additional information is displayed in the table.
7. Select the Next button (3). The following window will be displayed.
Figure 4-24 select image archive data to be restored
8. Select (check mark) the image archive data to be restored to the Voluson E-Series system (4).
9.
Select the Next button (5) and then select Yes to start, or No to cancel the restore procedure.
Functional Checks
4-22
Voluson E-Series Service Manual
5539550APB Revision 6

GE Voluson E Series Specifications

General

Brand	GE
Model	Voluson E Series
Category	Medical Equipment
Language	English