H3C S7500E Series

11-11
If you specify both an MSTI ID and a port, this command displays the BPDU statistics of a specified
MSTI on a specified port.
Examples
# Display the BPDU statistics of all MSTIs on GigabitEthernet 2/0/1.
<Sysname> display stp bpdu-statistics interface gigabitethernet 2/0/1
Port: GigabitEthernet2/0/1
Instance-independent:
Type Count Last Updated
--------------------------- ---------- -----------------
Invalid BPDUs 0
Looped-back BPDUs 0
MAX-aged BPDUs 0
TCN sent 0
TCN received 0
TCA sent 0
TCA received 2 10:33:12 01/13/2010
Config sent 0
Config received 0
RST sent 0
RST received 0
MST sent 4 10:33:11 01/13/2010
MST received 151 10:37:43 01/13/2010
Instance 0:
Type Count Last Updated
--------------------------- ---------- -----------------
Timeout BPDUs 0
MAX-hoped BPDUs 0
TC detected 1 10:32:40 01/13/2010
TC sent 3 10:33:11 01/13/2010
TC received 0
Instance 1:
Type Count Last Updated
--------------------------- ---------- -----------------
Timeout BPDUs 0
MAX-hoped BPDUs 0
TC detected 0
TC sent 0
TC received 0
Instance 2:
Type Count Last Updated
--------------------------- ---------- -----------------
Timeout BPDUs 0