To Next Page

To Previous Page

13-36

Please wait... Done.

[Sysname-GigabitEthernet2/0/1] port hybrid ip-subnet-vlan vlan 3

# Associate the hybrid Layer 2 aggregate interface Bridge-aggregation 1 with the IP subnet-based

VLAN 3 (assuming that Bridge-aggregation 1 does not have member ports).

<Sysname> system-view

[Sysname] vlan 3

[Sysname-vlan3] ip-subnet-vlan ip 192.168.1.0 255.255.255.0

[Sysname-vlan3] quit

[Sysname] interface bridge-aggregation 1

[Sysname-Bridge-Aggregation1] port link-type hybrid

[Sysname-Bridge-Aggregation1] port hybrid vlan 3 untagged

Please wait... Done

[Sysname-Bridge-Aggregation1] port hybrid ip-subnet-vlan vlan 3

# Associate the hybrid Layer 2 aggregate interface Bridge-aggregation 1 with the IP subnet-based

VLAN 3. Among the member ports of the aggregation group corresponding to Bridge-aggregation 1,

GigabitEthernet 2/0/2 is an access port and GigabitEthernet 2/0/3 is a trunk port.

<Sysname> system-view

[Sysname] vlan 3

[Sysname-vlan3] ip-subnet-vlan ip 192.168.1.0 255.255.255.0

[Sysname-vlan3] quit

[Sysname] interface bridge-aggregation 1

[Sysname-Bridge-Aggregation1] port link-type access

Please wait... Done.

Configuring GigabitEthernet2/0/2... Done.

Configuring GigabitEthernet2/0/3........................................... Done.

[Sysname-Bridge-Aggregation1] port link-type hybrid

[Sysname-Bridge-Aggregation1] port hybrid vlan 3 untagged

Please wait... Done.

Configuring GigabitEthernet2/0/2... Done.

Configuring GigabitEthernet2/0/3... Done.

[Sysname-Bridge-Aggregation1] port hybrid ip-subnet-vlan vlan 3

H3C S7500E Series Command Reference

Other manuals for H3C S7500E Series