17-12
Parameters
interface interface-list: Specifies one or multiple ports for which the GARP statistics are to be cleared.
You can provide up to 10 port lists, by each of which you can specify a single port in the form of
interface-type interface-number, or a port range in the form of interface-type interface-number1 to
interface-type interface-number2, where the end port number specified by interface-number2 must be
greater than the start port number specified by interface-number1. If no ports are specified, this
command clears the GARP statistics on all ports.
Description
Use the reset garp statistics command to clear the GARP statistics on the specified ports or all ports
if no ports are specified.
The cleared statistics include the statistics about GVRP protocol packets sent, received and dropped.
You can use this command in conjunction with the display garp statistics command to display GARP
statistics.
Related commands: display garp statistics.
Examples
# Clear the GARP statistics on all ports.
<Sysname> reset garp statistics
To Next Page
Loading...
Need help?
General
