H3C S7500E Series Command Reference

3-11
Field Description
PHY admin state for ethernet port : UP
Administrative state of the port, which can be:
 UP: The port is brought up with the undo shutdown
command.
 DOWN: The port is manually shut down.
Flow-control : closed
Flow control state, which can be:
 open: Flow control is enabled.
 closed: Flow control is disabled.
Auto-negotiation state : enable
Auto-negotiation state, which can be:
 enable: Auto-negotiation is enabled.
 disable: Auto-negotiation is disabled.
Port-isolate : disable
Whether the port joins a port isolation group:
 enable: The port has joined a port isolation group.
 disable: The port has not joined a port isolation group.
Mid-type : auto
Cable type supported by the UNI port, which can be:
 across: Crossover cables.
 auto: Both crossover cables and straightthrough cables
 normal: Straightthrough cables
Port-policy :
inbound : none
outbound : none
Upstream/downstream traffic policing parameters of the UNI:
 inbound: Upstream traffic policing parameters
 outbound: Downstream traffic policing parameters
Vlan-configration :
Current-vlan-mode : transparent
VLAN mode
Multicast-vlan : none
Multicast-group-number : 64
Number of multicast groups supported by the UNI
Multicast-strip-tag : disable
Whether it is enabled to strip the VLAN tag off the downstream
multicasts on the UNI
Current Status Display the current status
Link-state : UP Layer-2 link state
Auto-negotiation advertised technology
ability :
100BASE-TX
Full duplex 100BASE-TX
10BASE-T
Full duplex 10BASE-T
Auto-negotiation advertisement ability:
 100BASE-TX
 Full duplex 100BASE-TX
 10BASE-T
 Full duplex 10BASE-T

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English