HP 262SA - Page 102

Peripheral Devices
Table 6-2.
External Device Cables
CABLE
NO. HP PART NO. DESCRIPTION
13242M 13242-60002
EUROPEAN MODEM CABLE
I
Male RS-232C 25-pin connector for interfacing the terminal
to a plotter in an eavesdrop configuration.
Length: 5 meters (16.7 feet)
13242N
13242-60001
U.S. MODEM CABLE
Male RS-232C 25-pin connector for interfacing the terminal
to a plotter in an eavesdrop configuration.
Length: 5 meters (16.7 feet)
13242Y 13242-60005
EMP PROTECT.(MALE)
Male RS-232C 25-pin connector for
interfacing the terminal
to a plotter in an eavesdrop configuration. Provides protection
from lightning-induced
transients.
Length: 5 meters (16.7 feet)
13242G
13242-60010
RS-232C PRINTER CABLE (MALE)
Male RS-232C 25-pin connector for
interfacing the terminal
to RS-232C compatible printers such as the HP 2631 and 2635.
Length: 4.5 meters (15 feet)
13242H 13242-60011 RS232 PRINTER CABLE (FEMALE)
Female RS-232C 25-pin connector for interfacing the termi-
nal to RS-232C compatible printers such as the HP 2631 and
2635.
Length: 15 feet (4.5 meters)
45529A 8120-3445
ALTERNATE PERIPHERAL INTERFACE CABLE
ALTERNATE
PERIPHERAL INTERFACE connectors on
both ends. Used for connecting
external devices to the termi-
nal in an Alternate Peripheral Interface network.
6-4