HP 262SA - Integral Printer Control

Integral Printer
Control
INTRODUCTION
Appendix C
As an option, your terminal may include an integral printer. This section is concerned only
with the integral printer; information on operating the external printer is contained in
Section 6.
With an integral printer, you may do any of the following operations:
•
Perform a line feed (advance the paper one line).
•
Perform a form feed (advance the paper to the top of the next page).
•
Print one line from the display.
•
Print all displayed lines, from the cursor line to the last displayed line.
•
Print all lines in display memory, from the cursor line to the end of display memory.
• Select
several operating modes:
Continuous Forms:
Report
Format:
Metric Format:
Expanded Char-
acters mode:
Compressed Char-
acters mode:
Record mode:
Log Top mode:
Log Bottom mode:
normal-size characters, 80 characters per line, 10 characters per
inch (default selection)
60
text lines per page
64 text lines per page
characters expanded to 5 per inch
characters compressed to 16.2 characters per inch
data copied from the display (in Local mode) or from the com-
puter (Remote mode)
data is copied as it spills over the top of the filled display
memory
each time the cursor leaves a line of data to go to the next line,
the line left is copied
C-l