HP 262SA - Point-To-Point Cabling; Point-To-Point Hardwired Configuration

Data Communications
Point- To-Point Cabling
Terminal options useable for point-to point connection are the HP 2625A, standard and option
026, and the HP 2628A, standard and option 046. For the standard terminals, the connection is
made to port 1. Both options contain one port which consists of two connectors; one is a
datacomm connector and the other is an Alternate Peripheral Interface connector. The connec-
tion is made, of course, to the datacomm connector. Figure 7-4 illustrates a point-to-point
hardwired configuration.
13242X (RS-232-C)
13242P (RS-422)
13242Y (E.M.P. Protected)
Terminal
Port
2625A, Std 1
2625A, Opt. 026 1
2628A, Std
1
2628A, Opt. 046 1
NOTE:
1. -t> is a male connector.
2.
>is a female connector.
Figure 7-4. Point-to-Point Hardwired Configuration
7-7