HP P2000 Reference Guide

108 Alphabetical list of commands
reset disk-statistics
Description Resets performance statistics for disks.
This command resets basic disk statistics but not disk error statistics. To reset these, use the reset
disk-error-statistics command.
Syntax
reset disk-statistics
Example Reset statistics for all disks:
# reset disk-statistics
Success: Command completed successfully.
See also • reset all-statistics
• reset controller-statistics
• reset disk-error-statistics
• reset host-port-statistics
• reset vdisk-statistics
• reset volume-statistics
• show disk-statistics

HP P2000 Specifications

General

Drive Support	SAS
Controller	Dual Controller options available
Host Interface	6Gb SAS, 8Gb FC, 1Gb iSCSI
RAID Levels	RAID 0, 1, 5, 6, 10
Storage Type	SSD
Hot-swappable Components	Drives, controllers, power supplies, fans
Dimensions	8.9 x 44.8 x 63.5 cm (3.5 x 17.6 x 25 inches)
Drive Bays	Up to 12 LFF or 24 SFF drive bays per enclosure